US
GENERAL CLEANING INSTRUCTIONS
  • Wash thoroughly before first use.
  • RINSE LID IMMEDIATELY AFTER EACH USE with warm water, pressing the AUTOSEAL button (if applicable) so water flows through Drink Spout and Vent Hole.
  • Then wash lid in top rack of dishwasher, or soak lid for 10 minutes in hot, soapy tap water. Rinse thoroughly.
  • Plastic bodies labeled "Top Rack Dishwasher Safe" can be placed in the top rack of a dishwasher. Plastic bodies can also be hand washed with warm water and a mild detergent and then rinsed thoroughly.
  • ALWAYS STORE MUG OR BOTTLE WITH LID REMOVED to allow parts to dry completely.
  • In the event that a lid is not cleaned regularly and shows signs of improper care, Contigo recommends purchasing a replacement lid or purchasing a replacement item.
AUTOSEAL® Travel Mug
Care and Use Instructions

Hot contents can create internal pressure resulting in
discharge of hot vapor. Always press button with mug
in upright position always from face to properly release
pressure before drinking.

  • WARNING
  • Careful. The beverage you are about to enjoy may be very hot. For best results
    always use caution.
  • Keep out of reach of children when filled with hot liquids.
  • To properly use your AUTOSEAL® mug:
  • Always press button with
    mug in upright position
    away from face to release
    pressure before drinking

  • With button pressed,
    tilt mug to drink

  • Release button to seal

  • Prior to drinking, make sure the lid is properly threaded to the body and screwed down completely.
  • If filling with boiling liquid to cool down WITH THE LID OFF for at least 3 minutes before attaching the lid.
  • Avoid accidental depressing of the AUTOSEAL® button by keeping the button free and clear of other objects.
  • DO NOT overfill. Fill liquids to just before the threading in the body.
  • DO NOT microwave or freeze.
  • DO NOT use cleaning containing bleach, chlorine, abrasives, and/or other harsh chemicals.
  • DO NOT use with pulpy beverages.

USAGE RECOMMENDATIONS

  • The AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
  • Suitable for hot or cold beverages.
  • The AUTOSEAL® lid that came with your new purchase is to fit only your new mug. Not for use with others products.
  • To attach the ild, apply slight downward pressure and rotate counter-clockwise until you hear a click and lid falls into place. Then rotate lid clockwise to tighten completely.
  • Use this mug's lock feature to avoid unintended depressing of the AUTOSEAL® button.

      Cleaning instructions

  • Wash thoroughly before first use.
  • RINSE LID IMMEDIATELY AFTER EACH USE with warm

    water, pressing the AUTOSEAL® button so water flows through
    the Drink Spout and Vent Hole.

  • Both lid and body are top-rack dishwasher safe.
  • If washing by hand, soak the lid for 10 minutes in hot, soapy tap water. Hand-wash the body with warm water and a mild detergent. Rinse both the lid and body thoroughly before use.
Always store mug with lid removed to allow parts to dry completely.
ADDITIONAL CLEANING TIPS
For additional product cleaning tips, please visit www.GoContigo.com/cleaning.
www.GoContigo.com
©2013 Ignite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622 or GoContigo.com
AUTOSEAL® Travel Mug
Care and Use Instructions

Hot contents can create internal pressure resulting in
discharge of hot vapor. Always press button with mug
in upright position always from face to properly release
pressure before drinking.

  • WARNING
  • Careful. The beverage you are about to enjoy may be very hot. For best results
    always use caution.
  • Keep out of reach of children when filled with hot liquids.
  • To properly use your AUTOSEAL® mug:
  • Always press button with
    mug in upright position
    away from face to release
    pressure before drinking

  • With button pressed,
    tilt mug to drink

  • Release button to seal

  • Prior to drinking, make sure the lid is properly threaded to the body and screwed down completely.
  • If filling with boiling liquid to cool down WITH THE LID OFF for at least 3 minutes before attaching the lid.
  • Avoid accidental depressing of the AUTOSEAL® button by keeping the button free and clear of other objects.
  • DO NOT overfill. Fill liquids to just before the threading in the body.
  • DO NOT microwave or freeze.
  • DO NOT use cleaning containing bleach, chlorine, abrasives, and/or other harsh chemicals.
  • DO NOT use with pulpy beverages.

USAGE RECOMMENDATIONS

  • The AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
  • Suitable for hot or cold beverages.
  • The AUTOSEAL® lid that came with your new purchase is to fit only your new mug. Not for use with others products.
  • To attach the ild, apply slight downward pressure and rotate counter-clockwise until you hear a click and lid falls into place. Then rotate lid clockwise to tighten completely.

      Cleaning instructions

  • Wash thoroughly before first use.
  • RINSE LID IMMEDIATELY AFTER EACH USE with warm

    water, pressing the AUTOSEAL® button so water flows through
    the Drink Spout and Vent Hole.

  • Both lid and body are top-rack dishwasher safe.
  • To wash by hand, soak the lid for 10 minutes in hot, soapy tap water. Hand-wash the body with warm water and a mild detergent. Rinse both the lid and body thoroughly before use.
Always store mug with lid removed to allow parts to dry completely.
ADDITIONAL CLEANING TIPS
For additional product cleaning tips, please visit www.GoContigo.com/cleaning.
www.GoContigo.com
©2013 Ignite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622 or GoContigo.com
AUTOSEAL® Travel Mug
Care and Use Instructions
  • WARNING
  • Careful. The beverage you are about to enjoy is very hot. For best results always use caution.
  • Always press the AUTOSEAL® button when the tumbler is in the upright position prior to lifting it to drink. This will release any built up pressure. Release button to seal mug.
  • Keep out of reach of children when filled with hot liquids.
  • Prior to drinking, check to ensure the lid is properly threaded to body and screwed down 100%. Button should be depressed to release pressure each time the lid is screwed on.
  • If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before sealing with the lid.
  • Coffee brewed below boiling temperatures can be poured directly from coffee makers into the mug without waiting for liquid to cool down.
  • Avoid accidental depressing of button by keeping button free and clear of other objects.
  • Do not overfill. Fill liquids to just below the threading in the body.
  • Do not microwave and do not freeze.
  • Do not use cleaners containing bleach, chlorine, abrasives and/or other harsh chemicals.
  • USAGE RECOMMENDATIONS:
  • Suitable for hot and cold beverages.
  • To screw the lid on easily and safely place lid on top of mug. Apply slight downward pressure and rotate counter clockwise until you hear a click and lid falls into place. Proceed to rotate lid clockwise to tighten down.
  • The AUTOSEAL® lid that came with your new purchase is designed to only fit your new Contigo® mug. Not for use with other products.
  • AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
  • Following your purchase, wash all parts with hot soapy water before use. Rinse thoroughly and dry. Always store with lid removed to allow parts to dry completely.
  • Lid is top rack dishwasher safe.
  • Hand wash mug body.
  • LID CLEANING TIPS:
  • Always rinse the lid immediately after each use. Store with lid removed to allow parts to dry completely.
  • Rinse drink spout immediately after use, prior to putting into the dishwasher:
  1. 1) Turn lid so the underside is facing up and fill lid with hot soapy water.
  2. 2) Tilt the lid towards the drink spout while pressing the button to allow the soapy water to rinse through the drink spout.
  3. 3) Do this a few times for best results.
  • Rinse lid vent immediately after use, prior to putting into the dishwasher:
  1. 1) Turn lid so the underside is facing up and fill lid with hot soapy water.
  2. 2) Tilt lid towards the button while pressing the button to allow the soapy water to rinse through the vent hole.
  3. 3) Do this a few times for best results.
  • ADDITIONAL CLEANING TIPS:
  • To clean the top of the lid:
  1. 1) Use a non-abrasive sponge or brush head/swab to clean the drink spout in the open and closed position.
  2. 2) Rinse while pressing the button to allow the soapy water to rinse through the drink spout.
  • Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy water.
  • If desired, a small, pipe cleaner style brush, small arts and crafts paint brush, or a cotton swab can be used to clean the inside of the AUTOSEAL® mechanism. Turn lid so the underside is facing up and fill lid with hot soapy water. Run brush head or swab along the following areas to ensure complete cleaning:
  1. 1) Underneath and along both sides of the center plastic piece of the lid (Fig. A & C)
  2. 2) Along both the inner and outer walls of the threading (Fig. B)
  3. 3) The underside of the spout (Fig. D) Rinse repeatedly while pressing the button to allow the soapy water to rinse through the drink spout.
www.GoContigo.com
©2013 Ignite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622 or GoContigo.com
AUTOSEAL® Travel Mug
Care and Use Instructions

Hot contents can create internal pressure resulting in
discharge of hot vapor. Always press button with mug
in upright position always from face to properly release
pressure before drinking.

  • WARNING
  • Careful. The beverage you are about to enjoy may be very hot. For best results
    always use caution.
  • Keep out of reach of children when filled with hot liquids.
  • To properly use your AUTOSEAL® mug:
  • Always press button with
    mug in upright position
    away from face to release
    pressure before drinking

  • With button pressed,
    tilt mug to drink

  • Release button to seal

  • Prior to drinking, make sure the lid is properly threaded to the body and screwed down completely.
  • If filling with boiling liquid to cool down WITH THE LID OFF for at least 3 minutes before attaching the lid.
  • Avoid accidental depressing of the AUTOSEAL® button by keeping the button free and clear of other objects.
  • DO NOT overfill. Fill liquids to just before the threading in the body.
  • DO NOT microwave or freeze.
  • DO NOT use cleaning containing bleach, chlorine, abrasives, and/or other harsh chemicals.
  • DO NOT use with pulpy beverages.

USAGE RECOMMENDATIONS

  • The AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
  • Suitable for hot or cold beverages.
  • The AUTOSEAL® lid that came with your new purchase is to fit only your new mug. Not for use with others products.
  • To attach the ild, apply slight downward pressure and rotate counter-clockwise until you hear a click and lid falls into place. Then rotate lid clockwise to tighten completely.

      Cleaning instructions

  • Wash thoroughly before first use.
  • RINSE LID IMMEDIATELY AFTER EACH USE with warm

    water, pressing the AUTOSEAL® button so water flows through
    the Drink Spout and Vent Hole.

  • Lid is top-rack dishwasher safe.
  • To wash by hand, soak the lid for 10 minutes in hot, soapy tap water. Hand-wash the body with warm water and a mild detergent. Rinse both the lid and body thoroughly before use.
Always store mug with lid removed to allow parts to dry completely.
ADDITIONAL CLEANING TIPS
For additional product cleaning tips, please visit www.GoContigo.com/cleaning.
www.GoContigo.com
©2013 Ignite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622 or GoContigo.com
AUTOSEAL® Travel Mug
Care and Use Instructions

Hot contents can create internal pressure resulting in
discharge of hot vapor. Always press button with mug
in upright position always from face to properly release
pressure before drinking.

  • WARNING
  • Careful. The beverage you are about to enjoy may be very hot. For best results
    always use caution.
  • Keep out of reach of children when filled with hot liquids.
  • To properly use your AUTOSEAL® mug:
  • Always press button with
    mug in upright position
    away from face to release
    pressure before drinking

  • With button pressed,
    tilt mug to drink

  • Release button to seal

  • Prior to drinking, make sure the lid is properly threaded to the body and screwed down completely.
  • If filling with boiling liquid to cool down WITH THE LID OFF for at least 3 minutes before attaching the lid.
  • Avoid accidental depressing of the AUTOSEAL® button by keeping the button free and clear of other objects.
  • DO NOT overfill. Fill liquids to just before the threading in the body.
  • DO NOT microwave or freeze.
  • DO NOT use cleaning containing bleach, chlorine, abrasives, and/or other harsh chemicals.
  • DO NOT use with pulpy beverages.

      USAGE RECOMMENDATIONS

  • The AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
  • Suitable for hot or cold beverages.
  • The AUTOSEAL® lid that came with your new purchase is to fit only your new mug.
    Not for use with others products.
  • To attach the lid, apply slight downward pressure and rotate counter-clockwise until you hear a
    click and lid falls into place. Then rotate lid clockwise to tighten completely.

      Cleaning instructions

  • Wash thoroughly before first use.
  • Before rinsing or washing, open the lid interior by
    rotating its locking knob counter-clockwise and
    hinging it open fully. Also flip open the AUTOSEAL®
    button by holding the lid's handle right-side up and
    pressing up on the indentation in the handle curve.

  • RINSE LID IMMEDIATELY AFTER EACH USE
    with warm water, pressing the AUTOSEAL® button so
    water flows through the Drink Spout and Vent Hole.
  • Lid and any UNPAINTED stainless steel body are
    top-rack dishwasher safe. HAND-WASH ONLY any
    PAINTED stainless steel body.
  • To wash by hand, soak the lid for 10 minutes in hot, soapy tap water. Hand-wash the body with warm water and a mild detergent. Rinse both the lid and body thoroughly before use.
  • After cleaning, return the lid interior to its closed position and and turn knob clockwise until locked. Also return the AUTOSEAL® button to its closed position by snapping it into the lid handle.
Always store mug with lid removed to allow parts to dry completely.
ADDITIONAL CLEANING TIPS
For additional product cleaning tips, please visit www.GoContigo.com/cleaning.
www.GoContigo.com
©2013 Ignite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622 or GoContigo.com
Autosteel® Travel Mug
Care and Use Instructions

Hot contents can create internal pressure resulting in
discharge of hot vapor. Always press button with mug
in upright position always from face to properly release
pressure before drinking.

  • WARNING
  • Careful. The beverage you are about to enjoy may be very hot. For best results
    always use caution.
  • Keep out of reach of children when filled with hot liquids.
  • To properly use your AUTOSEAL® mug:
  • Always press button with
    mug in upright position
    away from face to release
    pressure before drinking

  • With button pressed,
    tilt mug to drink

  • Release button to seal

  • Prior to drinking, make sure the lid is properly threaded to the body and screwed down completely.
  • If filling with boiling liquid to cool down WITH THE LID OFF for at least 3 minutes before attaching the lid.
  • Avoid accidental depressing of the AUTOSEAL® button by keeping the button free and clear of other objects.
  • DO NOT overfill. Fill liquids to just before the threading in the body.
  • DO NOT microwave or freeze.
  • DO NOT use cleaning containing bleach, chlorine, abrasives, and/or other harsh chemicals.
  • DO NOT use with pulpy beverages.

      USAGE RECOMMENDATIONS

  • The AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
  • Suitable for hot or cold beverages.
  • The AUTOSEAL® lid that came with your new purchase is to fit only your new mug.
    Not for use with others products.
  • To attach the lid, apply slight downward pressure and rotate counter-clockwise until you hear a
    click and lid falls into place. Then rotate lid clockwise to tighten completely.
  • Use this mug's lock feature to avoid unintended depressing of the AUTOSEAL® button.

      Cleaning instructions

  • Wash thoroughly before first use.
  • Before rinsing or washing, open the lid interior by rotating its locking knob
    counter-clockwise and hinging it open fully.

  • RINSH LID IMMEDIATELY AFTER EACH USE
    with warm water, pressing the AUTOSEAL® button so
    water flows through the Drink Spout and Vent Hole.
  • Lid and any UNPAINTED stainless steel body are
    top-rack dishwasher safe. HAND-WASH ONLY any
    PAINTED stainless steel body.
  • To wash by hand, soak the lid for 10 minutes in hot, soapy tap water. Hand-wash the body with warm water and a mild detergent. Rinse both the lid and body thoroughly before use.
  • After cleaning, return the lid interior to its closed position and and turn knob clockwise until locked.
Always store mug with lid removed to allow parts to dry completely.
ADDITIONAL CLEANING TIPS
For additional product cleaning tips, please visit www.GoContigo.com/cleaning.
www.GoContigo.com
©2012 lgnite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622 or GoCongigo.com
AUTOSEAL® Travel Mug
Care and Use Instructions

Hot contents can create internal pressure resulting in
discharge of hot vapor. Always press button with mug
in upright position always from face to properly release
pressure before drinking.

  • WARNING
  • Careful. The beverage you are about to enjoy may be very hot. For best results
    always use caution.
  • Keep out of reach of children when filled with hot liquids.
  • To properly use your AUTOSEAL® mug:
  • Always press button with
    mug in upright position
    away from face to release
    pressure before drinking

  • With button pressed,
    tilt mug to drink

  • Release button to seal

  • Prior to drinking, make sure the lid is properly threaded to the body and screwed down completely.
  • If filling with boiling liquid to cool down WITH THE LID OFF for at least 3 minutes before attaching the lid.
  • Avoid accidental depressing of the AUTOSEAL® button by keeping the button free and clear of other objects.
  • DO NOT overfill. Fill liquids to just before the threading in the body.
  • DO NOT microwave or freeze.
  • DO NOT use cleaning containing bleach, chlorine, abrasives, and/or other harsh chemicals.
  • DO NOT use with pulpy beverages.

      USAGE RECOMMENDATIONS

  • The AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
  • Suitable for hot or cold beverages.
  • The AUTOSEAL® lid that came with your new purchase is to fit only your new mug.
    Not for use with others products.
  • To attach the lid, apply slight downward pressure and rotate counter-clockwise until you hear a
    click and lid falls into place. Then rotate lid clockwise to tighten completely.
  • Use this mug's lock feature to avoid unintended depressing of the AUTOSEAL® button.

      Cleaning instructions

  • Wash thoroughly before first use.
  • Before rinsing or washing, open the lid interior by
    rotating its locking knob counter-clockwise and
    hinging it open fully. Also flip open the AUTOSEAL
    button by holding the lid's handle right-side up and
    pressing up on the indentation in the handle curve.

  • RINSE LID IMMEDIATELY AFTER EACH USE
    with warm water, pressing the AUTOSEAL® button so
    water flows through the Drink Spout and Vent Hole.
  • Lid and any UNPAINTED stainless steel body are
    top-rack dishwasher safe. HAND-WASH ONLY any
    PAINTED stainless steel body.
  • To wash by hand, soak the lid for 10 minutes in hot, soapy tap water. Hand-wash the body with warm water and a mild detergent. Rinse both the lid and body thoroughly before use.
  • After cleaning, return the lid interior to its closed position and and turn knob clockwise until locked. Also return the AUTOSEAL® button to its closed position by snapping it into the lid handle.
Always store mug with lid removed to allow parts to dry completely.
ADDITIONAL CLEANING TIPS
For additional product cleaning tips, please visit www.GoContigo.com/cleaning.
www.GoContigo.com
©2013 Ignite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622 or GoContigo.com
AUTOSEAL® Travel Mug
Care and Use Instructions

Hot contents can create internal pressure resulting in
discharge of hot vapor. Always press button with mug
in upright position always from face to properly release
pressure before drinking.

  • WARNING
  • Careful. The beverage you are about to enjoy may be very hot. For best results
    always use caution.
  • Keep out of reach of children when filled with hot liquids.
  • To properly use your AUTOSEAL® mug:
  • Always press button with
    mug in upright position
    away from face to release
    pressure before drinking

  • With button pressed,
    tilt mug to drink

  • Release button to seal

  • Prior to drinking, make sure the lid is properly threaded to the body and screwed down completely.
  • If filling with boiling liquid to cool down WITH THE LID OFF for at least 3 minutes before attaching the lid.
  • Avoid accidental depressing of the AUTOSEAL® button by keeping the button free and clear of other objects.
  • DO NOT overfill. Fill liquids to just before the threading in the body.
  • DO NOT microwave or freeze.
  • DO NOT use cleaning containing bleach, chlorine, abrasives, and/or other harsh chemicals.
  • DO NOT use with pulpy beverages.

USAGE RECOMMENDATIONS

  • The AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
  • Suitable for hot or cold beverages.
  • The AUTOSEAL® lid that came with your new purchase is to fit only your new mug. Not for use with others products.
  • To attach the ild, apply slight downward pressure and rotate counter-clockwise until you hear a click and lid falls into place. Then rotate lid clockwise to tighten completely.

      Cleaning instructions

  • Wash thoroughly before first use.
  • RINSE LID IMMEDIATELY AFTER EACH USE with warm

    water, pressing the AUTOSEAL® button so water flows through
    the Drink Spout and Vent Hole.

  • Both lid and body are top-rack dishwasher safe.
  • To wash by hand, soak the lid for 10 minutes in hot, soapy tap water. Hand-wash the body with warm water and a mild detergent. Rinse both the lid and body thoroughly before use.
Always store mug with lid removed to allow parts to dry completely.
ADDITIONAL CLEANING TIPS
For additional product cleaning tips, please visit www.GoContigo.com/cleaning.
www.GoContigo.com
©2013 Ignite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622 or GoContigo.com
AUTOSEAL® Travel Mug
Care and Use Instructions

Hot contents can create internal pressure resulting in
discharge of hot vapor. Always press button with mug
in upright position always from face to properly release
pressure before drinking.

  • WARNING
  • Careful. The beverage you are about to enjoy may be very hot. For best results
    always use caution.
  • Keep out of reach of children when filled with hot liquids.
  • To properly use your AUTOSEAL® mug:
  • Always press button with
    mug in upright position
    away from face to release
    pressure before drinking

  • With button pressed,
    tilt mug to drink

  • Release button to seal

  • Prior to drinking, make sure the lid is properly threaded to the body and screwed down completely.
  • If filling with boiling liquid to cool down WITH THE LID OFF for at least 3 minutes before attaching the lid.
  • Avoid accidental depressing of the AUTOSEAL® button by keeping the button free and clear of other objects.
  • DO NOT overfill. Fill liquids to just before the threading in the body.
  • DO NOT microwave or freeze.
  • DO NOT use cleaning containing bleach, chlorine, abrasives, and/or other harsh chemicals.
  • DO NOT use with pulpy beverages.

USAGE RECOMMENDATIONS

  • The AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
  • Suitable for hot or cold beverages.
  • The AUTOSEAL® lid that came with your new purchase is to fit only your new mug. Not for use with others products.
  • To attach the ild, apply slight downward pressure and rotate counter-clockwise until you hear a click and lid falls into place. Then rotate lid clockwise to tighten completely.

      Cleaning instructions

  • Wash thoroughly before first use.
  • Flip open the cover inside of lid before rinsing or washing.
  • RINSE LID IMMEDIATELY AFTER EACH USE
    with warm water, pressing the AUTOSEAL® button so
    water flows through the Drink spout and vent hole.
  • Lid and any UNIPAINTED stainless steel body are
    top-rack dishwasher safe. HAND-WASH ONLY any
    PAINTED stainless steel body.
  • To wash by hand, soak the lid for 10 minutes in hot, soapy tap water. Hand-wash the body with warm water and a mild detergent. Rinse both the lid and body thoroughly before use.
Always store mug with lid removed to allow parts to dry completely.
ADDITIONAL CLEANING TIPS
For additional product cleaning tips, please visit www.GoContigo.com/cleaning.
www.GoContigo.com
©2013 Ignite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622 or GoContigo.com
Extreme Travel Mug
Care and Use Instructions
  • WARNING
  • Careful. The beverage you are about to enjoy is very hot. For best results always use caution.
  • If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before sealing with the lid.
  • Coffee brewed below boiling temperatures can be poured directly from coffee makers into the mug without waiting for liquid to cool down.
  • Prior to drinking check to ensure the lid is secured tightly.
  • Do not overfill. Fill liquids to just below the threading in the body.
  • Keep out of reach of children when filled with hot liquids.
  • Not recommended for carbonated beverages.
  • Following purchase of this item, wash all parts with hot soapy water before first use.
  • Do not microwave, do not put in the dishwasher and do not freeze.
  • Do not use cleaners containing bleach, chlorine, abrasives and/or other harsh chemicals.
  • USAGE RECOMMENDATIONS:
  • Suitable for hot and cold beverages.
  • The sealing lid is only designed to fit this Contigo® mug. Not for use with other products.
  • Mug is leak proof when closed properly. Drink seal must be pushed down firmly and completely so pull tab is flush with lid top.
  • Hand wash only. Wash thoroughly immediately after each use. Clean with lid in the open position. Always store with lid removed to allow parts to dry completely.
  • The lid closure tab should be in the open position when securing lid onto mug or when removing lid.
  • Lid can be screwed onto body in two different positions to allow for right or left handed use.
  • TO OPEN FOR DRINKING:
  • Pull open drink spout seal with pull tab (Fig A). Fold back pull tab and secure on top of the lid (Fig B).
www.GoContigo.com
©2013 Ignite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622 or GoContigo.com
Kids Food Jar
Care and Use Instructions
  • WARNING
  • Careful. The food you are about to enjoy may be very hot. For best results always use caution.
  • Not intended for children under 3 years of age.
  • Prior to transporting, make sure the lid is properly threaded to the body and screwed down completely.
  • Use onlywith adult supervision when product contains hot foods or liquids.
  • if filling with boiling liquid, allow liquid to cool down WITH THE LID OFF for at least 3 minutes before attaching the lid.
  • DO NOT overfill. Fill liquids to just below the threading in the body.
  • DO NOT microwave or freeze.
  • DO NOT use cleaners containing bleach, chlorine, abrasives, and/or other harsh chemicals.
  • USAGE RECOMMENDATIONS
  • Suitable for hot or cold foods.
  • For maximum thermal effciency, preheat or prechill food jar prior to use. Fill with hot/cold tap water, attach lid, let stand 5 to 10 minutes and empty.
  • The lid that came with your new purchase is designed to fit only your Contigo food jar. Not for use with other products.
  • To attach the lid, apply slight downward pressure and rotate counter-clockwise untill you hear a click and lid falls into place. Then rotate lid clockwise to tighten completely.
  • CLEANING INSTRUCTIONS
  • Wash thoroughly before first use.
  • RINSE IMMEDIATELY AFTER EACH USE with warm water.
  • Product is top-rack dishwasher safe.
  • To wash by hand, soak the product for 10 minutes in hot, soapy tap water. Hand wash with warm water and a mild detergent. Rinse both the lid and body thoroughly before use.
  • ALWAYS STORE FOOD JAR WITH LID REMOVED to allow parts to dry completely.
www.GoContigo.com
©2013 Ignite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622 or GoContigo.com
AUTOSPOUT® Kids’ Bottle
Care and Use Instructions
  • WARNING
  • Not for use with hot, carbonated, or pulpy beverages.
  • Not intended for children under 3 years of age.
  • Do not microwave or freeze.
  • Use onlywith adult supervision when product contains hot foods or liquids.
  • Do not use cleaners containing bleach, chlorine, abrasives and / or other harsh chemicals.
  • CLEANING INSTRUCTIONS
  • Wash thoroughly before first use.
  • RINSE LID IMMEDIATELY AFTER EACH USE with warm water and spout in the open position
  • - Remove straw for best results.
  • - With underside of lid facing up, pull up on straw
    holder and valve assembly to separate from spout.
  • Then wash lid in top rack of dishwasher, or soak lid for 10 minutes in hot, soapy tap water.
  • - A CONTIGO brush® (available at GoContigo.com) can be used to clean to clean the spout.
  • - Rinse thoroughly.
  • - Reassemble the lid prior to use. Insert valve assembly into spout, straw holder into valve assembly, and straw into straw holder. Push straw up as far as possible to nest correctly into lid.
  • Bodies are “Top-Rack Dishwasher Safe” and can also be hand washed with warm water and a mild detergent and then rinsed thoroughly.
  • ALWAYS STORE PRODUCT WITH LID REMOVED and spout in open position to allow parts to dry completely.
  • USAGE RECOMMENDATIONS:
  • Do not pull or rotate the spout shield as it may cause damage to the lid.
  • silicone drink spout is not removable.
  • ADDITIONAL CLEANING TIPS
For additional product cleaning tips visit www.gocontigo.com/cleaning
©2013 Ignite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622 or GoContigo.com
AUTOSEAL® Kids' Bottle
Care and Use Instructions
  • WARNING
  • Not for use with hot, carbonated or pulpy beverages.
  • Not intended for children uder 3 years of age
  • Check product regularly for proper function and replace immediately if damaged.
  • Do not microwave or freeze.
  • Do not use cleaners containing bleach, chlorine, abrasives and/or other harsh chemicals.
Usage Recommendations
  • PRess Button

    to sip

  • tip

    to drink

  • Release button

    to Automatically Seal

      Cleaning instructions

  • Wash thoroughly before first use.
  • Rinse lid immediately after each use

    With warm water, pressing the AUTOSEAL button
    so water flows through Drink Spout and Vent Hole.

  • Then wash lid in top rack of dishwasher, or soak lid for 10 minutes in hot, soapy tap water. Rinse throughly.
  • Bodies ar “Top Rack Dishwasher Safe” and can also be hand washed with warm water and mild detergent and then rinsed thoroughly.
Always store mug with lid removed to allow parts to dry completely.
ADDITIONAL CLEANING TIPS
For additional product cleaning tips visit www.Gocontigo.com/cleaning
©2013 Ignite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622 or GoContigo.com
AUTOSEAL® Water Bottle
Care and Use Instructions
CAUTION
  • Product is NOT designed for hot liquids. Use only with cold liquids.
  • Not for use with carbonated or pulpy beverages.
  • Check product regularly for proper function and replace immediately if damaged.
  • Always press the AUTOSEAL® button with bottle in an UPRIGHT position prior to tipping it to drink. This will release any built-up pressure. Release button to seal.
  • Prior to drinking, make sure the lid is properly threaded to the body and screwed on completely.
  • Avoid accidental depressing of the AUTOSEAL® button by keeping the button free and clear of other objects.
  • DO NOT overfill. Fill liquids to just below the threading in the body.
  • DO NOT microwave or freeze.
  • DO NOT use cleaners containing bleach, chlorine, abrasives, and/or other harsh chemicals.
Usage Recommendations
  • PRess Button

    to open

  • tip

    to drink

  • Release button

    to Automatically Seal

  • The AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
  • The AUTOSEAL® lid that came with your new purchase is designed to only fit your Contigo water bottle. Not for use with other products.
      Cleaning instructions

  • Wash thoroughly before first use.
  • Rinse lid immediately after each use

    With warm water, pressing the AUTOSEAL® button
    so water flows through Drink Spout and Vent Hole.

  • Lid, plastic body and straw are top-rack dishwasher safe.
  • Hand-wash stainless steel body.
  • if washing by hand, soak the lid for 10 minutes in hot, soapy tap water. Hand-wash body with warm water and a mild detergent. Rinse both the lid and body thoroughly before use.
  • For best results, use a Contigo bottle brush, www.Gocontigo.com.
Always store mug with lid removed to allow parts to dry completely
©2013 Ignite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622
AUTOSPOUT® Stainless Steel Water Bottle
Care and Use Instructions

Hot contents can create internal pressure resulting in
discharge of hot liquids that can cause injury. DO NOT
use this produvt with hot liquids.

  • Not for use with carbonated or pulpy beverages.
  • Prior to drinking, make sure the lid is properly threaded to the body and screwed on completely.
  • Avoid accidental depressing of the AUTOSPOUT button by keeping free and clear of other objects.
  • DO NOT overfill. Fill liquid to just below the threading in the body.
  • DO NOT microwave of freeze.
  • DO NOT use cleanse containing bleach, chlorine, abrasives and/or other harsh chemicals.

USAGE RECOMMENDATIONS

  • Do not pull or rotate the spout shield as it may cause damage to the lid.
  • Silicone drink spout in not removable.
  • When using the water at high altitudes, such as during an airplane flight or when bottle is exposed to prolonged then reseal the lid before use.
  • The AUTOSOUT lid that came with you new purchase is designed to only fit your Contigo water bottle.
    Not for use with other products.

      Cleaning instructions

  • Wash thoroughly before first use.
  • RINSE IMMEDIATELY AFTER EACH USE with warm water and spout in the open position.

    -Remove straw for best results.

  • Lid and straw are top-rack dishwasher safe.
  • Hand-wash stainless steel body.
  • If washing by hand, soak the lid for 10 minutes in hot, soapy water. Hand-wash the body with warm water and a mild detergent. Rinse both lid and body thoroughly before use.
  • For best cleaning result, use a Contigo bottle+ spout brush, www.GoContigo.com
ALWAYS STORE BOTTLE WITH LID REMOVED to allow parts to dry completely.
©2013 Ignite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622
AUTOSPOUT® Water Bottle
Care and Use Instructions
  • Product is NOT designed for hot liquids. Use only with cold liquids.
  • Not for use with carbonated or pulpy beverages.
  • Prior to drinking, make sure the lid is properly threaded to the body and screwed on completely.
  • Avoid accidental depressing of the AUTOSPOUT button by keeping free and clear of other objects.
  • DO NOT overfill. Fill liquid to just below the threading in the body.
  • DO NOT microwave of freeze.
  • DO NOT use cleanse containing bleach, chlorine, abrasives and/or other harsh chemicals.

USAGE RECOMMENDATIONS

  • Do not pull or rotate the spout shield as it may cause damage to the lid.
  • Silicone drink spout in NOT removable.
  • When using the water bottle at high altitudes, such as during an airplane flight or when bottle is exposed to prolonged hot temperatures, such as in an enclosed car, twist the lid a quarter turn to relieve pressure, then reseal the lid before use.
  • The AUTOSOUT lid that came with you new purchase is designed to only fit your Contigo water bottle.
    Not for use with other products.

      Cleaning instructions

  • Wash thoroughly before first use.
  • RINSE IMMEDIATELY AFTER EACH USE with warm water and spout in the open position.

    -Remove straw for best results.

  • Lid, plastic body and straw are top-rack dishwasher safe.
  • If washing by hand, soak the lid for 10 minutes in hot, soapy water. Hand-wash the body with warm water and a mild detergent. Rinse both lid and body thoroughly before use.
  • For best cleaning result, use a Contigo bottle+ spout brush, www.GoContigo.com
ALWAYS STORE BOTTLE WITH LID REMOVED to allow parts to dry completely.
©2013 Ignite USA. All rights reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622